Component to Composite w/Down Scaling
Price:


Product Feature
- Input: 1 Component Video (YPbPr), Audio R/L
- Output: 1 Composite Video (RCA), 1 S-video
- Simultaneously output composite video and s-video
- Output video supports both NTSC and PAL. Switch by button on the box
- With Audio L and Audio R inputs supports earphone
Product Description
If you have a component (YPbPr or Red, Green, Blue RCA interfaces) source that you need to display on a TV with a composite input (typically yellow RCA) or S-Video, this converter is perfect for you. This converter also handles audio pass-through with dual RCA input on the component side and 3.5mm stereo output on the composite side.Why The Conversion Box?Component and composite/s-video signals are two very different signals. With component, the video signal is divided into three different signals in order to theoretically transmit up to 3 times as much video information, making component capable of handling HD resolutions up to 1080p. Composite and S-Video (both the same signal) don't have high definition capabilities and handle all video over a single conductor.This conversion box not only integrates the RGB component signal into the composite signal (something a simple cable can't do), and also downscales the signal to fit the resolution of your standard definition composite TV.This converter also includes a PAL/NTSC switch (PAL for European/Asian (except Japan) users, NTSC for North American/Japanese users)Component to Composite w/Down Scaling Review
If you are looking for a product to allow you to use newer A/V equipment (i.e. 1st Generation AppleTV) with an older TV, this conversion box works very well. Simple, easy setup, cables included.Most of the consumer Reviews tell that the "Component to Composite w/Down Scaling" are high quality item. You can read each testimony from consumers to find out cons and pros from Component to Composite w/Down Scaling ...

No comments:
Post a Comment