Etekcity® HDMI Extender with IR over a Single CAT5e/6 Ethernet Cable up to 330ft Supports resolutions up to 1080p, 3D, and HDCP, HD, Long Range, Built in IR for remote control
Price:


Product Feature
- Extends HDMI at 1080p up to 100m (330ft)
- Supports HDBaseT specifications for single-Ethernet cable HDMI extension
- 1080p, 3D, HDCP, Dolby TrueHD, DTS Master Audio supported
- Includes IR extension functionality for remote control of source devices
Product Description
Full-featured HDMI over a single CAT5e/6 Ethernet cableThe innovative HDBaseT technology allows for a full-featured HDMI signal to pass through one Ethernet cable at great distances. This extender supports a 1080p HDMI signal with uncompressed LPCM or compressed DTS or Dolby Digital audio and HDCP. Also featured is IR extension functionality, allowing an IR signal to be passed through Ethernet. These advances in technology have resulted in the unprecedented capability to pass the most advanced AV signals to date over one standard CAT6 Ethernet cable.
Incredible flexibility and convenience
By using this HDMI extender, you can overcome the limits of HDMI cable length, increasing maximum range more than fivefold. Connecting your HDMI AV system to a TV in another room or area of your home or business has never been easier. A low-latency, high-quality digital connection is now possible, enabling configurations that were not before an option. As an added benefit, this extender also features IR extension. So you can use your source devices?remote controls to control them at a distance coneniently.
Specifications
100 meters (330ft) maximum distance
Supports HDCP
Supports uncompressed HDMI 1.3 signal
Supports uncompressed audio such as LPCM
Supports compressed audio such as DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD)
Enables HDMI10.2 Gbps over a single 100m Cat5e/6 cable
Supports 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth
Supports 1080p@60Hz@48bit pixels
Supports 3D pass-through
Supports CEC pass-through
CAT5e/6 cable follows the standard of IEEE-568B
Package Contents:
1xHDBaseT Extender - Sender Unit
1xHDBaseT Extender - Receiver Unit
2xIR Dongles
2x5V DC Power Supplies
1xUser Manual
Etekcity® HDMI Extender with IR over a Single CAT5e/6 Ethernet Cable up to 330ft Supports resolutions up to 1080p, 3D, and HDCP, HD, Long Range, Built in IR for remote control Review
For my budget, this product fit perfectly. My goal was to run two 50ft Cat6e cable up the wall in one of my bedrooms, over the ceiling, and back down another wall to a 42" flat screen. I tested it before-hand with my cables and some other, shorter, cat5 cables. Both worked wonderfully, although Cat6 can be adapted for other uses incase you get rid of this adapter.The only problem I have with it are the tiny green artifacts that I get, pushing a 1920x1080 resolution. It looks almost like a stuck pixel, but they flash ever-so slightly. You can usually only see them in the black-blacks in an image.
If I dim down to any other resolutions, I get a quality image without any artifacts. I've found that lowering my refresh rate from 30hz, to 24hz helps to get rid of alot of the artifacts at my high resolution. Of course, you may not have this problem running a lower resolution, or even a shorter cable. I might also add that I am going from a PC to a plasma television.
Most of the consumer Reviews tell that the "Etekcity® HDMI Extender with IR over a Single CAT5e/6 Ethernet Cable up to 330ft Supports resolutions up to 1080p, 3D, and HDCP, HD, Long Range, Built in IR for remote control" are high quality item. You can read each testimony from consumers to find out cons and pros from Etekcity® HDMI Extender with IR over a Single CAT5e/6 Ethernet Cable up to 330ft Supports resolutions up to 1080p, 3D, and HDCP, HD, Long Range, Built in IR for remote control ...

No comments:
Post a Comment